News

Super Chopper Rooder Harley Citycoco r804 – M1 EEC COC 2000W45KMH 1500W25KMH

Super Chopper Rooder Harley Citycoco r804 – M1 EEC COC 2000W45KMH 1500W25KMH

EEC certification:

Download: Super Chopper

COC 2000W45KMH

Download:Super Chopper Rooder COC

COC 1500W25KMH

Download:Super Chopper Rooder COC 2

 

2000W45KM/H:

 

COMPLETE VEHICLE

 

EU CERTIFICATE OF CONFORMITY

 

The undersigned:

Mrs. Jian Tianxiu / General Manager

Hereby certifies that the following complete vehicle:

 

0.1. Make : Rooder

 

0.2. Type : M1

 

0.2.1. Variant : 00

 

0.2.2. Version : 00

 

0.2.3. Commercial name(s) (where appropriate) :  

M1

 

0.3. Category, subcategory and sub-subcategory of vehicle : L1e-B

 

0.4. Company name and address of manufacturer :  

MANGOSTEEN TECHNOLOGY CO., LIMITED

FLAT 01C3, 10/F CARNIVAL COMM BLDG 18 JAVA ROAD, NORTH POINT, HONG KONG, CHINA

 

0.4.2. Name and address of manufacturer’s authorized representative (if any) :  

GUANGZHOU OUYE TECHNOLOGY CO., LTD.

SHOP 106, NO.126, TIANXIN CENTRAL ROAD, TIANXIN VILLAGE, TAIHE TOWN, BAIYUN DISTRICT, GUANGZHOU CITY, GUANGDONG PROVINCE, P.R. CHINA

 

0.5.1. Location of the manufacturer’s statutory plate(s) : L, x370, y20, z740
0.5.2. Method of attachment of the manufacturer’s statutory plate(s)  

:

Riveted on the left side of main frame

 

0.6. Location of the vehicle identification number on the chassis :  

R, x370, y20, z740

 

1. Vehicle identification number : ☆R3MM10000J10000001☆

 

conforms in all respects to the type described in EU type-approval (e9*168/2013*11377*00) issued on (XX,XX,XXXX) and

 

can be permanently registered in Member States having right/left-hand traffic and using metric/imperial units for the speedometer.

 

 

Hong Kong,China

XX,XX,XXXX

(place)

(date)

(Signature)

 

VEHICLE CATEGORY L

General construction characteristics
1.3. Number of axles : 2
  and wheels: : 2
1.3.1. Axles with twinned wheels :  
1.3.2. Powered axles : R
6.2.4. Advanced braking system : None
       
Main dimensions
2.2.1. Length : 2030 mm
2.2.2. Width :   850 mm
2.2.3. Height : 1100 mm
2.2.4. Wheelbase : 1520 mm
2.2.4.1. Wheelbase sidecar :  
2.2.5. Track width    
2.2.5.1. Track width front :  
2.2.5.2. Track width rear :  
2.2.5.3. Track width sidecar :  
2.2.10.6. Ground clearance between the axles :  
2.2.15. Wheelbase to ground clearance ratio :  
2.2.17. Seat height :  
       
Masses
2.1.1. Mass in running order :   66 kg
2.1.2. Actual mass :  149 kg
2.1.3. Technically permissible maximum laden mass : 149 kg
2.1.3.1. Technically permissible maximum mass on front axle :   61 kg
2.1.3.2. Technically permissible maximum mass on rear axle :   88 kg
2.1.3.3. Technically permissible maximum mass on sidecar axle :  
2.1.7. Technically permissible maximum towable mass :  
  Braked:   Unbraked  
2.1.7.1. Technically permissible maximum laden mass of the combination :  
2.1.7.2. Technically permissible maximum mass at the coupling point :  
       
Powertrain
3.1.2.1 Manufacturer : Ningbo Qianjiang Motor Co., Ltd.
3.1.2.2 Electric motor code (as marked on the engine or other means

of identification)

: MGSD60VA/??????

 

3.3.3.4 15/30 minutes power : 2.0 kW @ 420 min-1
3.3.1. Electric vehicle configuration: pure electric/ hybrid electric/ manpower-electric : Pure electric
3.1.2.1. Manufacturer :  
3.1.2.2. Electric motor code (as marked on the engine or other means of identification) :  
3.3.3.4. 15/30 minute power :  
3.1.3.1. Manufacturer :  
3.1.3.2. Application code (as marked on the engine or other means of identification) :  
3.3.1. Electric vehicle configuration :  
3.3.5.2. Category of hybrid electric vehicle :  
3.9.2. Maximum assistance factor :  
       
Maximum speed
1.8. Maximum speed of vehicle : 45 km/h
3.9.3. Maximum vehicle speed for which the electric motor gives assistance :  
       
Drive-train and control
3.5.3.9. Transmission (type) : W
3.5.4. Gear ratios : 1
3.5.4.1. Final drive ratio : Not applicable
3.5.4.2. Overall gear ratio in highest gear :  
       
Installation of tyres
6.18.1.1. Tyre size designation    
  Axle 1: tyre: 130/70-12, 58J

minimum load-capacity: 16

minimum speed category: B

tyre pressure: 250 kpa

rim: 3.50 x 12

Axle 2: tyre: 215/40-12, 52M

minimum load-capacity: 24

minimum speed category: B

tyre pressure: 300 kPa

rim: 8.00 x 12

  Sidecar wheel:
6.16.1.1. Location and arrangement :  
Coupling devices
7.2.8. Type-approval number of coupling-device : Not applicable
       
Environmental performance
4.0.1. Environmental step : Not applicable
4.0.6. Sound level measured according to Regulation (EU) No 134/2014 Annex IX including amendment Regulation (EU) 2016/1824    
4.0.6.1. Stationary : Not applicable
4.0.6.2. Drive-by : Not applicable
4.0.6.3. Limit value for Lurban : Not applicable
3.2.15. Exhaust emission measured according to Regulation (EU) No 134/2014 including amendment Regulation (EU) 2016/1824    
3.2.15.1. Type V test: tailpipe emissions after cold start, including the deterioration factor, if applicable    
  CO : Not applicable
  THC : Not applicable
  NOx : Not applicable
3.2.15.2. Type II test: tailpipe emissions at (increased) idle and free acceleration    
  HC + NOx :  
  PM :  
  HC: — ppm at normal idling speed and — ppm at high idle speed
  CO: —% vol. at normal idling speed and —% vol. at high idle speed
3.2.15.3. Smoke corrected absorption coefficient :  
Energy efficiency
4.0.3.3. Energy consumption : 26 Wh/km
4.0.3.4 Electric range : 58 km
       
Additional information
9.1. Remarks : Not applicable
9.2. Exemptions : Not applicable

Explanatory notes

 

*    The applicable items marked with * shall remain with the approval authority that grants the type-approval and all other applicable items shall make
part of the information folder.

(1)    For internal combustion engine.

(2)      Classified according to Article 4 of and Annex I to Regulation (EU) No 168/2013, the coding shall be indicated, e.g. ‘L3e-A1E’ for a
low-performance Enduro motor-cycle.

(3)    Suppress the entry if not applicable.

(4)    Delete where not applicable (no deletion required when more than one entry is applicable).

(5)    Indicate the configuration by following codes:

– R: right side of the vehicle.

– L: left side of the vehicle.

– F: front side of the vehicle.

– RE: rear side of the vehicle.

(6)    This value shall be calculated (π = 3.1416) and rounded off to the nearest cm3.

(7)    Specify the tolerance.

(8)    Indicate the position by the following codes:

– rx: row number

– R: right side of the vehicle

– C: centre of the vehicle

– L: left side of the vehicle

(9)    Indicate fuel type by the following codes:

– P: petrol

– B5: diesel

– M: mixture

– LPG: liquid petroleum gas

– NG: natural gas

– BM: Biomethane

– E5: petrol E5

– E10: petrol E10

– E85: ethanol E85

– BD: biodiesel

– H2: hydrogen

– H2NG: mixtures of hydrogen and natural gas

– A: compressed air

– O: other

Note: vehicles can be fuelled with both petrol and a gaseous fuel but, where the petrol system is fitted for emergency purposes or starting only and of which the petrol tank cannot contain more than 5 litres of petrol, shall be regarded for the test as vehicles which can only run a gaseous fuel.

(10)    L-category vehicles equipped with OBD according to Article 21 of Regulation (EU) No 168/2013.

(11)    Standard ISO 612:1978 – Road vehicles – dimensions of motor vehicles and towed vehicles – terms and definitions.

(12)      This figure shall be rounded off to the nearest tenth of a millimetre.

(13)      The specified particulars are to be given for any proposed variants.

(14)      ‘A’: for a three-point belt;

– ‘B’: for a lap belt;

– ‘S’: for special types of belt (in this case provide specific information on the nature of these types under observation in point 6.15.7.);

– ‘Ar’, ‘Br’ or ‘Sr’: for a belt incorporating an inertia reel;

– ‘Are’, ‘Bre’ and ‘Sre’: for a belt equipped with an inertia reel and an energy-absorption device on at least one anchorage.

(15)    Indicate the location of the centre of the VIN/statutory plate by the following codes:

– R: right side of the vehicle

– C: centre of the vehicle

– L: left side of the vehicle

– x: horizontal distance (in mm) from the front-most axle (preceded by ‘-‘ (i.e. minus) if located in front of the front axle)

– y: horizontal distance (in mm) from the longitudinal centre line of the vehicle

– z: distance (in mm) from the ground

– (r/o): parts needing to be removed or opened for access to the marking.

Example for a VIN fitted on the right side of a motorcycle steering head-pipe, 500 mm behind the front axle, 30 mm from the centre-line and
1,100 mm high: R, x500, y30, z1100.

Example for a statutory plate fitted to a quadricycle, on the right side of the vehicle, 100 mm in front of the front axle, 950 mm from the longitudinal
centre line of the vehicle and 700 mm high, under the bonnet:  R, x-100, y950, z700 (r/o).

(16)      Add the number of the Euro level and the character corresponding to the provisions used for type-approval.

(17)      Indicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of this
Annex. For the identification of variant and versions it may be employed the matrix set out in point 2.3 of Part B of this Annex.

(18)      In case of multi-stage approval, supply this information for each stage.

(19)      Provide this information for each component and separate technical unit installed in the vehicle or system. n case of multi-stage approval, supply this
information for each stage.

(20)      Provide this information for each combustion engine, electric motor and hybrid application.

(21)    Provide this information for each vehicle type.

(22)    For cycles designed to pedal indicate the maximum speed for which the electric motor provides assistance.

(23)    Axles with twinned wheels/powered:

F: front

R: rear

M: middle (for vehicles with sidecar)

F & R: front and rear

Examples:

– twinned wheels: F (front twinned wheels for a vehicle of subcategory L5e-A)

– powered axles: R (rear powered axle for a L3e-A1 motorcycle).

(24)      Indicate the transmission type by the following codes:

– M: manual

– A: automatic

– C: CVT

– O: other

– W: wheel-hub engine

(25)    For externally chargeable hybrid electric vehicles, the “weighted, combined” values for CO 2 , fuel consumption and electric energy consumption
shall be indicated.

(26)    Indicate the arrangement of the cylinders by following codes:

– LI: in line.

– V: in V.

– O: opposed -cylinder engine.

– S: single-cylinder engine.

– R: Rotatory piston engine.

(27)      In the case of more than one electric motor indicate the addition of all the engines.

(28)    Indicate the longitudinal distance between front axle and sidecar axle.

(29)    For compression ignition engines only.

 

1500W25KM/H:

COMPLETE VEHICLE

 

EU CERTIFICATE OF CONFORMITY

 

The undersigned:

Mrs. Jian Tianxiu / General Manager

Hereby certifies that the following complete vehicle:

 

0.1. Make : Rooder

 

0.2. Type : M1

 

0.2.1. Variant : 00

 

0.2.2. Version : 00

 

0.2.3. Commercial name(s) (where appropriate) :  

M1

 

0.3. Category, subcategory and sub-subcategory of vehicle : L1e-B

 

0.4. Company name and address of manufacturer :  

MANGOSTEEN TECHNOLOGY CO., LIMITED

FLAT 01C3, 10/F CARNIVAL COMM BLDG 18 JAVA ROAD, NORTH POINT, HONG KONG, CHINA

 

0.4.2. Name and address of manufacturer’s authorized representative (if any) :  

GUANGZHOU OUYE TECHNOLOGY CO., LTD.

SHOP 106, NO.126, TIANXIN CENTRAL ROAD, TIANXIN VILLAGE, TAIHE TOWN, BAIYUN DISTRICT, GUANGZHOU CITY, GUANGDONG PROVINCE, P.R. CHINA

 

0.5.1. Location of the manufacturer’s statutory plate(s) : L, x370, y20, z740
0.5.2. Method of attachment o

Tinggalkan Balasan

Alamat e-mel anda tidak akan disiarkan. Medan diperlukan ditanda dengan *

Shopping cart

Summer 25% discount on all last year's bike models

Start typing to see products you are looking for.